Inverto Unicable lnb

– Low phase Noise HDTV-DVBS2 compliant

– Low Noise Figure
– Very high cross-pol isolation
– Programmable Static frequency mapping mode
– Dish alignment mode
Categories: , .


This Unicable2 LNB enables installations with up to 32 satellite receivers (or unlimited when used in static frequency mapping mode) over a single coax cable based on digital channel stacking technology. Digital channel stacking technology uses fast wide­band analog to digital converters and applies digital signal processing to select desired transponder channels, upconvert them and stack them as L-band signals over the Unicable output port. The Unicable2 LNB offers a full flexibility of channel selection, supports many more set top boxes over existing cabling which greatly reduces costs and simplifies installations at subscribers homes.


The LNB firmware can be configured to provide a fixed transponder-to-IF frequency mapping and line up to 32 transponders (or more, depending on the bandwidth of the desired transponders) over the Unicable output. This allows for an unlimited number of receivers to be connected to the LNB making Satellite TV multi-room distribution and MDU installations substantially cheaper and simpler than ever before. Operation mode – dynamic or static – output power level, channel bandwidth, UB numbers, center frequencies and dish alignment mode can all be programmed as well.


The LNB can be powered over a connected STB or through an AC/DC adapter and power inserter in case the STB is unable to provide the necessary power. The communication protocol between the LNB and the connected Unicable receivers is based on EN50494 and/or EN50607 and can be defined per User Band enabling installations consisting of both EN50494-only and EN50607 compatible Next Generation PVRs and HGWs.

Technical Specifications:  
Input Frequency Range 10.7 ~ 12.75 GHz
Noise Figure 1 dB Max.
LO Frequency 10.4 GHz
LO Initial Accuracy +/- 1.0
LO Temperature Drift +/- 2.5
LO Phase Noise @ 10K Hz -80 dBc / Hz
Unicable Conversion Gain (AGC) 55 dB Min.
Gain Variation +/- 0.75 dB/UB
Image Rejection 40 dB Min.
Cross-pol Isolation 22 dB Min.
O/P 1 dB Compression Point 0 dBm min.
O/P VSWR 2.5 : 1 max.
Output Impedance 75Ω (F-type)
IF Channel (User Band) bandwidth Configurable 10~64MHz (default 36MHz)
Output IF Channels (UBs) Up to 32, Default 32UBs:
  CH0 1210MHz (EN50494+EN50607)
  CH1 1420MHz (EN50494+EN50607)
  CH2 1680MHz (EN50494+EN50607)
  CH3 2040MHz (EN50494+EN50607)
  CH4 984MHz (EN50494+EN50607)
  CH5 1020MHz (EN50494+EN50607)
  CH6 1056MHz (EN50494+EN50607)
  CH7 1092MHz (EN50494+EN50607)
  CH8 1128MHz (EN50607)
  CH9 1164MHz (EN50607)
  CH10 1256MHz (EN50607)
  CH11 1292MHz (EN50607)
  CH12 1328MHz (EN50607)
  CH13 1364MHz (EN50607)
  CH14 1458MHz (EN50607)
  CH15 1494MHz (EN50607)
  CH16 1530MHz (EN50607)
  CH17 1566MHz (EN50607)
  CH18 1602MHz (EN50607)
  CH19 1638MHz (EN50607)
  CH20 1716MHz (EN50607)
  CH21 1752MHz (EN50607)
  CH22 1788MHz (EN50607)
  CH23 1824MHz (EN50607)
  CH24 1860MHz (EN50607)
  CH25 1896MHz (EN50607)
  CH26 1932MHz (EN50607)
  CH27 1968MHz (EN50607)
  CH28 2004MHz (EN50607)
  CH29 2076MHz (EN50607)
  CH30 2112MHz (EN50607)
  CH31 2148MHz (EN50607)
Channel isolation 25 dB Min.
Unicable Control Signals DiSEqC1.x/DiSEqC2.x, EN50494/EN50607
DC Power 400mA@13.5V
Working Temperature – 30°C~ + 60°C
Weight 350g